Voltage Regulator - Malaguti Password 250 i.e. Workshop Manual

PASSWORD 250 i.e.
Removing both sub panels provides access to the
following components:
• Voltage regulator (D)
• "CDI" control unit (E)

VOLTAGE REGULATOR

• Disconnect connector (A) by pressing the suitable tab.
• Undo screws (V2) and remove regulator (D).
"CDI" CONTROL UNIT
• Disconnect connector (B) by pressing the suitable tab.
• Undo screws (V2) and remove "CDI" control unit (E).
To unscrew the screws (V2) you must use a
fool-proofing "TORX" wrench (T. 25)
FRAME AND RUNNING GEAR
D I S A S S E M B LY
67 11/06
5
V
2
E D
B E
A
A
V
2