Programmable Sensor Keys - Siemens HiPath 2000 User Manual

Getting to know your OpenStage phone

Programmable sensor keys

Your OpenStage 40/40 G has six illuminated sensor keys. You can assign
functions and phone numbers to them on two levels.
Mirea, Ch
K1998
Depending on how they are programmed, you can use the sensor keys as:
•
•
•
Touch the key to activate the programmed function or dial the stored num-
ber.
Press the key to open a menu for programming it
A label for the function is displayed to the left of the key. You can define
the labeling according to your requirements
The status of a function is shown by the LED on the corresponding sensor
key.
Meaning of LED displays on function keys and DSS keys
LED
S
T
R
[1] In this manual, flashing sensor keys are identified by this icon, regardless of the flashing
22
Increase the number of programmable sensor keys by connecting a
key module page 17.
Function keys page 73
Repdial keys page 80
Procedure keys
You can program all programmable sensor keys (except "Shift") on
two levels. The Shift key
and extended key functionality must be active (contact your service
personnel).
In addition to functions and procedures, external phone numbers
and internal numbers without LED display can also be saved on the
second level
Meaning of function key
Off The function is deactivated. The line is free.
[1]
Flashing Indicates the function sta-
tus.
On The function is activated.
interval. The flashing interval represents different statuses, which are described in detail in
the corresponding sections of the manual.
The programmable sensor keys on multi-line phones function as
trunk keys page 110.
page 78
page 73 must be configured for this,
page 80.
page 78.
page 81.
Meaning of DSS key
The line is busy.
There is a call on the line.