Programmable Sensor Keys - Siemens Hipath 4000 Operation Manual

Programmable sensor keys

Your OpenStage 80 has nine (OpenStage 60: eight) illuminated sensor
keys to which you can assign frequently-used functions or numbers.
Increase the number of programmable sensor keys by connecting a
key module
Depending on how they are programmed, you can use the sensor keys as:
• Function keys
• Repdial key page 85
• Direct station selection keys
Only for repdial keys can you also program the second level for di-
rect destination selection.
Touch the key to activate the programmed function or dial the stored num-
ber.
Press and hold a function key or repdial key to open a menu for program-
ming it. Direct station selection (DSS) keys can only be programmed via
the service menu.
A label for the function is displayed to the left of the key; it cannot be
changed. You can define the labeling for repdial or DSS keys according to
your requirements
The status of a function is shown by the LED on the corresponding sensor
key.
Explanation of LED displays for programmed sensor keys
LED Meaning of function key
S
Off The function is deactivated. The line is free.
T
[1]
Flashing The function is in use.
R
On The function is activated.
[1] In this manual, flashing sensor keys are identified by this icon, regardless of the flashing
interval. The flashing interval represents different statuses, which are described in detail in
the corresponding sections of the manual.
The programmable sensor keys on multi-line phones function as
trunk keys
Getting to Know Your OpenStage Phone
page 15.
page 83
page 89
page 91.
page 114.
Repdial/Direct station se-
lection key
The line is busy.
There is a call on the line.
19