Programmable Sensor Keys - Siemens HiPath 8000 Operating Manual

Programmable sensor keys

Your OpenStage 80 has nine (OpenStage 60: eight) illuminated sensor
keys. You can assign functions or numbers to them.
To open the programming menu, press and hold down the relevant sensor
key page 67.
To activate the programmed function, briefly press the relevant key
page 70.
Increase the number of programmable sensor keys by connecting a
key module
Depending on how they are programmed, you can use the sensor keys as:
• Function keys
• Repdial keys
• Direct station selection keys
Touch the key briefly to activate the programmed function or dial the stored
number page 70.
Press and hold down the function key to open a menu for programming it.
Repdial keys and direct station selection keys can only be programmed via
the Program/Service menu
A label for the function is displayed to the left of the key; it cannot be
changed. You can define the labeling for repdial or DSS keys according to
your requirements
The status of a function is shown by the LED on the corresponding sensor
key.
Meaning of LED displays on function keys
LED Meaning of function key
S
Off The function is deactivated.
T
1
Flashing The function is in use.
R
On The function is activated.
[1] In this manual, flashing sensor keys are identified by this icon, regardless of the flashing in-
terval. The flashing interval represents different statuses, which are described in detail in
the corresponding sections of the manual.
Getting to know your OpenStage phone
page 17.
page 66
page 66
page 99
page 67.
page 68.
21