Turning Ringer Cutoff On And Off; Activating/Deactivating "Do Not Disturb - Siemens HiPath 2000 User Manual

Step by Step
M0149Ringer cutoff on
M0148Ringer cutoff off
M0086DND on
M0087DND off

Turning ringer cutoff on and off

If you do not wish to take calls, you can activate the ring-
er cutoff function. Calls are only identified by one ring
signal, an indication on the display, and a key which has
been programmed to flash (such as a trunk key).
Activating
c
Open the idle menu
Select and confirm the option shown
Deactivating
c
Open the idle menu
Confirm.

Activating/deactivating "Do not disturb"

If you do not wish to take calls, you can activate do not
disturb. Internal callers hear the busy tone, external call-
ers are connected to another phone, which you can
specify (contact your service personnel).
Activating
c
Open the idle menu
Select and confirm the option shown.
Activating
c
Open the idle menu
Confirm.
When you lift the handset, you will hear a special
tone (continuous buzzing) reminding you that "Do
not disturb" is activated.
Authorized internal callers automatically override
the DND feature after five seconds.
[1] "Differing display view in a HiPath 4000 environment"
Privacy/security
page 26.
[1]
.
page 26.
page 26.
page 26.
page 136
87