Siemens HiPath 2000 User Manual page 116

Making calls in the team/executive/secretary configuration
Step by Step
M0252Forward Line: Off
116
Deactivating call forwarding
N
Open the Program/Service menu
Select and confirm the option shown.
R
Press the required trunk key.
or
j
Enter the required trunk number.
or
R
If available, press the "K1952CFW MULAP" key.
If you have activated call forwarding for a trunk, a
special dial tone sounds when the line is seized.
Understanding LED messages of the "K1952CFW
MULAP" key
S
The LED on the "K1952CFW MULAP" key is off - call for-
warding is not active for this trunk.
or
R
The LED on the "K1952CFW MULAP" key lights up - call
forwarding is active for this trunk.
or
T
The LED on the "K1952CFW MULAP" key is flashing
slowly, the trunk is the call forwarding destination.
page 31.