Programmable Sensor Keys - Siemens HIPATH 8000 User Manual

Programmable sensor keys

Your OpenStage 40 telephone features six programmable lit sensor keys.
Increase the number of programmable sensor keys by connecting a
key module
Mirea, Ch.
Level 2
Touch the key briefly to activate the programmed function or dial the stored
number page 76.
If you hold the key pressed, you are prompted as to whether to start pro-
gramming this function key.
If the prompt is not displayed or a programmed function is not exe-
cuted, then you can only launch key programming via the user menu
page 71 (ask your service personnel about the current setting).
Only for repdial keys can you also program the second level for di-
rect destination selection.
You can label these keys with internal and external phone numbers or fre-
quently used functions (platform-dependent; please contact the responsi-
ble service personnel).
The configured phone number or function name is displayed next to the
key.
The status of a function is shown by the LED on the corresponding sensor
key.
Line and DDS keys can only be programmed by service personnel
via the service menu.
Meaning of LED displays on function keys
LED Meaning of function key
S
Off The function is deactivated.
T
1
Flashing Indicates the function status.
R
On The function is activated.
[1] In this manual, flashing sensor keys are identified by this icon, regardless of the flashing in-
terval. The flashing interval represents different statuses, which are described in detail in
the corresponding sections of the manual.
Getting to know your OpenStage phone
page 17.
21