Step by Step
M0099Control Relay On
M0100Control Relay Off
(only for HiPath 3000)
If this function has been configured (contact your ser-
vice personnel), you can use up to four relays to enable/
disable different devices (such as a door opener).
Depending on how you program the relays, you can ac-
tivate and deactivate them manually them or configure
them to activate and deactivate automatically (after tim-
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 (system networking via PC net-
Select and confirm the option shown
select and confirm the option shown.
Enter the relay.
Sensors (HiPath 33x0/35x0 only)
If configured (contact your service personnel), sensors
are able to recognize signals, call your phone, and dis-
play an appropriate message on the screen.