Answering Calls With The Trunk Keys; Dialing With Trunk Keys; Placing A Call On Hold On A Trunk Key And Retrieving The Held Call - Siemens HiPath 2000 User Manual

Step by Step
if nec.
if nec.
\
Making calls in the team/executive/secretary configuration

Answering calls with the trunk keys

Prerequisite: Your telephone rings or the trunk key
flashes quickly.
T
Press the trunk key that is flashing quickly
(not necessary if "Prime Line" is active).
^
Lift the handset.
or On-hook dialing: Speakerphone mode.

Dialing with trunk keys

S
Press the free trunk key you wish to use to establish the
connection
(not necessary if "Prime Line" is active).
j
Dial the phone number.
^
If the party does not answer: Lift the handset.
or On-hook dialing: Speakerphone mode.
Placing a call on hold on a trunk key and re-
trieving the held call
Prerequisite: You are conducting a call via one of your
group's trunks. The "K1920Hold" key has been pro-
grammed on your telephone
Hold
S
Press the "K1920Hold" key.
if nec.
s
or Replace the handset or press the disconnect key.
Depending on the configuration (contact your service
personnel), this may be necessary so other team mem-
bers can also pick up the call on hold.
Retrieving the call
T
Press the trunk key flashing slowly.
page 73.
111