Accepting A Call For Another Member Of Your Team; Ringing Group - Siemens HiPath 2000 User Manual

Using team functions
Step by Step
M0015Pickup - group
H1875Destinations
M0110Ringing group on
M0092Ringing group off
120
Accepting a call for another member of
your team
You can use your own telephone to accept calls for oth-
er telephones in your team, even while engaged in an
ongoing call. To do this, contact your service personnel
to find out if a pickup group has been configured.
Prerequisite: Your telephone rings briefly. The display
shows "T0374call at:" with the phone number/name of
the initiator, and number/name of the caller in the lower
line.
Confirm.

Ringing group

You can have calls for your telephone signaled audibly at
up to five other internal phones. The phone that an-
swers the call first receives the call.
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 (system networking via PC net-
work)
Saving, displaying, and deleting telephones for the
ringing group
N
Open the Program/Service menu
g
Confirm.
Select and confirm the option shown
Follow the display prompts (enter the internal station
number).
If your phone belongs to a ringing group, your
display will show the station number or the name
of the originator on the upper line and that of the
caller on the lower line.
Removing all telephones in a call ringing group
Select and confirm the option shown.
[1] "Differing display view in a HiPath 4000 environment"
page 126!
page 31.
[1]
.
page 136