Programmable Sensor Keys - Siemens OpenStage 60 User Manual

Programmable sensor keys

Your OpenStage 80/80 G has nine (OpenStage 60/60 G: eight) illuminated
sensor keys. You can assign functions or numbers to them.
Increase the number of programmable sensor keys by connecting a
key module
Depending on how they are programmed, you can use the sensor keys as:
• Function keys
• Repdial keys
• Procedure keys
You can program internal and external station numbers on the sec-
ond level for all programmable sensor keys (except the Shift key).
The LED function is not available for internal station numbers on
the second level.
Touch the key to activate the programmed function or dial the stored num-
ber.
Press and hold a function key or repdial key to open a menu for program-
ming it. Direct station selection (DSS) keys can only be programmed via
the service menu.
A label indicating the key's function is displayed to the left of the key; it can-
not be changed. You can change the labels for repdial or DSS keys accord-
ing to your requirements
The status of a function is shown by the LED on the corresponding sensor
key.
Meaning of LED displays on function keys
LED
S
Off
T
[1]
Flashing
R
On
[1] In this manual, flashing sensor keys are identified by this icon, regardless of the flashing
interval. The flashing interval represents different statuses, which are described in detail in
the corresponding sections of the manual.
The programmable sensor keys on multi-line phones function as
trunk keys
Getting to know your OpenStage phone
page 18.
page 89
page 95
page 93
page 96.
Meaning of function key
The function is deactivated.
Indicates the function status.
The function is activated.
page 140.
23