Using A Mobile Phone Number At A Random Phone; Logging On To The "Guest Telephone - Siemens HiPath 2000 User Manual

Step by Step
M0202Entry complete
Using a mobile phone number at a
random phone
You can program a mobile phone number that was set
up especially for you by your service personnel at a sys-
tem-based OpenStage phone of your choice. The origi-
nal "guest telephone" setting is deactivated. The mobile
phone number remains available until you log off the
"guest telephone".

Logging on to the "guest telephone"

Log on to the "guest telephone" with a mobile phone
number.
Prerequisite: You received a mobile phone number
and, where applicable, a password (consult your service
personnel). The "K1027Mobile Login" key is configured
on your OpenStage.
S
Press the "K1027Mobile Login" key.
or if a key is not configured,
j
Enter the code for "Mobile Login (log on)" (see
page 148).
The request "New number." is output.
j
Enter the "Mobile phone number".
The request "Code for IP number nnn (e.g. 834) is out-
put:
j
if nec. Enter your password.
(
Press the key shown.
or
Confirm.
The logon procedure starts.
Your mobile phone number will appear, preceded by the
mobility icon, in the last line on the left when you are
correctly logged on
You can no longer see the original user settings for the
"guest telephone" but you can now use your mobile
connection. Entries are only temporarily saved in the
call lists and personal phonebook, that is, they are not
there the next time you log on.
More functions/services
page 25.
99