Programmable Sensor Keys - Siemens OpenScape Voice Operating Manual

Getting to know your OpenStage phone

Programmable sensor keys

Your OpenStage 80 SIP has nine (OpenStage 60 SIP: eight) illuminated
sensor keys. You can assign functions or numbers to them.
To open the programming menu, press and hold down the relevant sensor
key
To activate the programmed function, briefly press the relevant key
Depending on how they are programmed, you can use the sensor keys as:
•
•
•
Touch the key briefly to activate the programmed function or dial the stored
number
Press and hold down the function key to open a menu for programming it.
Repdial keys and direct station selection keys can only be programmed via
the Program/Service menu
A label for the function is displayed to the left of the key; it cannot be
changed. You can define the labeling for repdial or DSS keys according to
your requirements.
The status of a function is shown by the LED on the corresponding sensor
key.
Meaning of LED displays on function keys
LED
S
T
R
[1] In this manual, flashing sensor keys are identified by this icon, regardless of the flashing in-
24
page 78.
page 81.
Increase the number of programmable sensor keys by connecting a
key module
Function keys page 77
Repdial keys page 77
Direct station selection keys
page 81.
Meaning of function key
Off The function is deactivated.
1
Flashing Indicates the function status.
On The function is activated.
terval. The flashing interval represents different statuses, which are described in detail in
the corresponding sections of the manual.
page 18.
page 116
page 78.