Holding External Calls - Siemens HiPath 2000 User Manual

Step by Step
T0940Held on line: 801
\
M0166Retrieve line

Holding external calls

If you have programmed a hold key on your phone
page 73, you can put external calls on hold.
Then all other stations can accept the call on the as-
signed trunk.
S
Press the "K1920Hold" key.
The message of the relevant trunk appears (e.g. 801)
and note the trunk number.
If available, the LED of the assigned trunk key flashes
slowly.
if nec.
s
or Replace the handset or press the key shown.
Depending on the configuration, this may be necessary
so other members can also pick up the call on hold.
Accepting call on hold
Prerequisite: One or more calls are on hold. The phone
is idle.
N
Open the Program/Service menu
Select and confirm the option shown.
or
S
If the "K1921Retrieve" key is available
it.
j
Enter the noted trunk number.
or
T
If there is a "K1935Line:" key available for the relevant
trunk, it flashes slowly. Press the key shown.
Enhanced phone functions
page 31.
page 73, press
65