Programmable Sensor Keys - Siemens OpenStage 40 HFA HiPath 4000 Operation Manual

Getting to Know Your OpenStage Phone

Programmable sensor keys

Your OpenStage 40 has 6 illuminated sensor keys. You can assign func-
tions to them on two levels.
Mirea, Ch
Shift
Depending on how they are programmed, you can use the sensor keys as:
•
•
Touch the key to activate the programmed function or dial the stored num-
ber.
Press the key to open a menu for programming it
A label for the function is displayed to the left of the key; it cannot be
changed. You can define the labeling for repdial or DSS keys according to
your requirements
The status of a function is shown by the LED on the corresponding sensor
key.
Explanation of LED displays for programmed sensor keys
LED
S
T
R
[1] In this manual, flashing sensor keys are identified by this icon, regardless of the flashing in-
16
Increase the number of sensor keys by adding a key module
page 13.
X
sensor key with function
Direct destination/Direct station selection key
Only for direct destination selection keys can you program the se-
cond level, also for direct destination selection.
page 75.
Meaning of function key
Off The function is deactivated.
Flas- The function is in use.
[1]
hing
On The function is activated.
terval. The flashing interval represents different statuses, which are described in detail in
the corresponding sections of the manual.
The programmable sensor keys on multi-line phones function as
line keys page 87.
page 72
Meaning of DSS key
The line is free.
The line is busy.
There is a call on the line.
page 73
page 72.