Controlling Connected Computers/Programs/Telephone Data Service - Siemens HiPath 2000 User Manual

Step by Step
M0185Tel. data service
0
M0202Entry complete
0
Controlling connected computers/
programs/telephone data service
If this function has been configured (contact your ser-
vice personnel), you can control connected computers
or programs running on them, such as hotel services or
information systems, from your telephone.
Prerequisite: You have set up a connection.
N
Open the Program/Service menu
Select and confirm the option shown.
For entering data, you are guided by the connected
computer. However, depending on configuration (con-
tact your service personnel), you must activate your en-
tries in one of the following ways:
Inputs in en-bloc mode
9
... Enter data.
(
Complete entry.
or
Confirm.
or Inputs in online mode
The connected computer processes your entries direct-
ly.
(
Enter the code.
9
... Enter data.
More functions/services
page 31.
105