Programmable Sensor Keys - Siemens HiPath 500 Operating Instructions Manual

Getting to know your OpenStage phone

Programmable sensor keys

Your OpenStage 40 T has six illuminated sensor keys. You can assign func-
tions and phone numbers to them on two levels.
Mirea, Ch
Depending on how they are programmed, you can use the sensor keys as:
•
•
•
Touch the key to activate the programmed function or dial the stored num-
ber.
Press the key to open a menu for programming it
A label for the function is displayed to the left of the key; it cannot be
changed. You can define the labeling for repdial or DSS keys according to
your requirements
The status of a function is shown by the LED on the corresponding sensor
key.
Meaning of LED displays on function keys and DSS keys
LED
S
T
R
[1] In this manual, flashing sensor keys are identified by this icon, regardless of the flashing in-
18
Increase the number of programmable sensor keys by connecting a
key module page 14.
Layer 1
Function keys page 67
Repdial keys page 72
Procedure keys page 70
You can program all programmable sensor keys (except "Shift") on
two levels. The Shift key
and extended key functionality must be active (contact your service
personnel).
In addition to functions and procedures, external phone numbers
and internal numbers without LED display can also be saved on the
second level page 72.
page 73.
Meaning of function key
Off The function is deactivated. The line is free.
[1]
Flashing The function is in use.
On The function is activated.
terval. The flashing interval represents different statuses, which are described in detail in
the corresponding sections of the manual.
The programmable sensor keys on multi-line phones function as
trunk keys page 100.
page 67 must be configured for this,
page 70.
Meaning of DSS key
The line is busy.
There is a call on the line.