Communicating With Pc Applications Over A Csta Interface - Siemens HiPath 2000 User Manual

More functions/services
Step by Step
+-0
106
Communicating with PC applications
over a CSTA interface
If configured (contact your service personnel), you can
use your phone to communicate with PC applications
(CSTA = Computer Supported Telecommunications
Applications). You send information to the application
and receive information from the application,
for example, via your phone display.
S
Press the "K1328Data I/O" key.
(Key programming
j
Enter the three-digit ID for the application you wish to
control.
9e
... Use the relevant keys to communicate with the applica-
tion.
Temporarily interrupting communication with the
application
^
The phone is ringing. You answer the call.
T
The "K1328Data I/O" key flashes: Communication to the
application is automatically interrupted.
Resuming communication with the application
T
Press the flashing "K1328Data I/O" key. The LED lights
up.
Ending communication with the application
Select and confirm the relevant CSTA message.
or
^ \
Lift the handset and replace it again.
page 73.)