Configuring Repdial Keys - Siemens HiPath 2000 User Manual

Programming sensor keys
Step by Step
M0001Assign telephony func-
M0001Prog. feature key
M0037Change key
M1895+=Next layer
H1875Destinations
M0065Repdial key
M0068Exit
M0038Another key
M1893Key label
80

Configuring repdial keys

You can also program internal and external station num-
bers on the second level. The LED function is not avail-
able for internal station numbers on the second level. To
program the second level, you must program a "Shift"
key
See also
S
Hold down the key shown.
Confirm.
or
N
Open the Program/Service menu
Select and confirm the option shown.
S
Press the key shown.
Confirm.
if nec.
Select and confirm the option shown.
g
Confirm.
Confirm.
j
Enter the station number.
If you make a mistake:
a
Press. This deletes all entered digits.M1898M1897
Confirm.
or
Select and confirm the option shown.
or
Select and confirm to assign a label
You dial the saved number by pressing the key
You can also save a number during a call.
page 73.
page 22.
page 38.
page 31.
page 81.