Transferring A Call After A Speaker Call Announcement In A Group - Siemens HiPath 2000 User Manual

Step by Step
M0023Consultation
M0003Speaker call
M0022Transfer
Transferring a call after a speaker call
announcement in a group
If this function has been configured (contact your ser-
vice personnel), you can use a speaker call (announce-
ment, page 118) to announce a call in progress to a
group of users
After a member of the group has accepted the call re-
quest, you can transfer the waiting party.
Prerequisite: You are conducting a call.
Confirm. The other party is placed on hold.
c
Press the key shown.
Select and confirm the option shown.
j
Enter the group's station number.
[
Announce the call.
When a member of the group accepts the call
page 50, you are connected to this party.
\
Replace the handset.
or
Select and confirm the option shown
If the connection between the two other parties
is not established within 45 seconds, the call
from the first part returns to you (recall).
[1] "Differing display view in a HiPath 4000 environment"
Enhanced phone functions
page 59.
[1]
.
page 136
69