Installing The Usb Cable And Light Path Diagnostics Assembly - Lenovo ThinkServer TD200x Hardware Maintenance Manual

14. Lift the USB cable and light path diagnostics assembly mounting bracket out
15. Disconnect the USB cable from the USB cable and light path diagnostics
16. If you are instructed to return the USB cable and light path diagnostics

Installing the USB cable and light path diagnostics assembly

To install the USB cable and light path diagnostics assembly, complete the following
steps:
196
ThinkServer TD200x Types 3719, 3821, 3822, and 3823: Hardware Maintenance Manual
and away from the server while you pull the diagnostics cable through the
hole.
assembly:
a. Rotate the USB cable and light path diagnostics assembly mounting
bracket so that you are looking at the rear of the bracket.
b. Squeeze the retaining clips on each side of the USB cable connector and
pull the USB cable away from the mounting bracket.
assembly, follow all packaging instructions, and use any packaging materials
for shipping that are supplied to you.
1
Spring clips
1. Touch the static-protective package that contains the USB cable and light path
diagnostics assembly to any unpainted metal surface on the server; then,
remove the assembly from the package.
2. Connect the USB cable to the replacement USB cable and light path
diagnostics assembly:
a. Rotate the USB cable and light path diagnostics assembly mounting
bracket so that you are looking at the rear of the bracket.
b. Squeeze the retaining clips on each side of the USB cable connector and
align the key on the cable connector with the notch on the mounting
bracket.
c. Insert the connector into the mounting bracket; then, release the retaining
clips.
3. Feed the light path diagnostics cable into the server through the opening in the
front of the server.