Turning The Stabilizing Feet - Lenovo ThinkServer TD200x Hardware Maintenance Manual

4. Install and lock the left-side cover (see "Installing the left-side cover" on page
5. Install the hot-swap power supplies.
6. Reconnect the external cables and power cords; then, turn on the attached

Turning the stabilizing feet

To rotate the front feet, do the following:
1. Carefully position the server on a flat surface. The feet ( 1 ) should hang over
2. Press in on the clips to hold the feet in place; then, pry the feet away from the
164
ThinkServer TD200x Types 3719, 3821, 3822, and 3823: Hardware Maintenance Manual
160).
devices and turn on the server.
the edge of the flat surface to ease removal.
server. In some cases, you might need a screwdriver to pry the feet from the
server.