Lenovo ThinkServer TD200x Hardware Maintenance Manual page 169

3. Press the release latch on the power supplies and filler panels and pull them
out of the power-supply cage.
1
Release latch
2
Hot-swap power supply
4. Unlock and remove the left-side cover.
5. Pull up on the power-supply cage handle to unlock the cage; then, rotate the
cage out until it stops. The tab on the rear power-supply latch bracket will click
into place when the cage is completely out of the way.
1
Power-supply cage
2
Power-supply cage handle
6. Let the power-supply cage rest on the rear power-supply latch bracket.
Chapter 7. Installing optional devices and replacing customer replaceable units
161