10. Remove any of the following components that are installed on the system
11. Rotate the release lever toward the front of the chassis.
12. Slide the system board toward the front of the server to disengage the tabs
13. If you are instructed to return the system board, follow all packaging
Installing the system board
To install the system board, complete the following steps:
234
ThinkServer TD200x Types 3719, 3821, 3822, and 3823: Hardware Maintenance Manual
board and put them in a safe, static-protective place:
v Adapters (see "Removing an adapter" on page 186).
v Extender card (see "Removing an extender card" on page 209).
v DIMMs (see "Removing a memory module" on page 212).
v Microprocessors and heat sinks (see "Removing a microprocessor and heat
sink" on page 220).
v Battery (see "Removing the battery" on page 174).
from the chassis; then, grasp the handles and carefully lift the system board
out of the server.
instructions, and use any packaging materials for shipping that are supplied to
you.
1
Handle
2
Release lever