Chapter 7. Installing Optional Devices And Replacing Customer Replaceable Units; Server Components - Lenovo ThinkServer TD200x Hardware Maintenance Manual

Chapter 7. Installing optional devices and replacing customer
replaceable units
Important: Before you install optional hardware, make sure that the server is
working correctly. Start the server, and make sure that the operating system starts,
if an operating system is installed. If the server is not working correctly, see the
Problem Determination and Service Guide for diagnostic information.
This chapter provides detailed instructions for installing optional hardware devices in
the server.

Server components

The following illustration shows the major components in the server.
© Lenovo 2009. Portions © IBM Corp. 2009.
1
Cover
2
Rear adapter retention bracket
3
Air baffle
4
Heat sink
5
Microprocessor
6
Heat sink retention bracket
7
DIMMs
8
System board
9
VRM
10
Power-supply cage
11
Power supply
12
Power-supply filler
13
Control panel assembly
14
USB cable/EasyLED diagnostics
assembly
15
DVD drive
16
Bezel
17
Optical drive bay EMC shield
18
2.5-inch EMC shield
19
2.5-inch hot-swap drive
20
2.5-inch drive cage assembly
21
SAS/SATA 2.5-inch backplane
22
Fan assembly
23
Hot-swap fan
24
ServeRAID MR10i
25
ServeRAID BR10i
26
ServeRAID MR10is
151