Lenovo ThinkServer TD200x Hardware Maintenance Manual page 24

v EasyStartup DVD
v EasyManage DVD
v Integrated network support
v Intelligent Platform Management Interface (IPMI) 2.0
v Large data-storage capacity and hot-swap capability
v Large system-memory capacity
v EasyLED diagnostics
v Memory mirroring
v PCI-32 adapter capabilities
16
ThinkServer TD200x Types 3719, 3821, 3822, and 3823: Hardware Maintenance Manual
– System configuration
– Network interfaces and settings
– Installed hardware
– EasyLED diagnostics status
– Service processor status and configuration
– Vital product data, firmware, and UEFI (formerly BIOS) configuration
– Hard disk drive health
– RAID controller configuration
– Event logs for service processors
The diagnostic programs create a merged log that includes events from all
collected logs. The information is collected into a file that you can send to
Lenovo service and support. Additionally, you can view the information locally
through a generated text report file. You can also copy the log to a removable
media and view the log from a Web browser.
For additional information about preboot diagnostics, see the Hardware
Maintenance Manual.
The ThinkServer EasyStartup program guides you through the configuration of
the hardware, the RAID controller, and the installation of the operating system
and device drivers.
The ThinkServer EasyManage program helps you manage and administer your
servers and clients through remote problem notification as well as monitoring and
alerting.
The server comes with one integrated Broadcom 5709C series Gigabit Ethernet
controller, which supports connection to a 10 Mbps, 100 Mbps, or 1000 Mbps
network. For more information, see "Enabling the Broadcom Gigabit Ethernet
Utility program" on page 266.
IPMI 2.0 support providing secure remote power-on/power-off and several
standard alerts for components such as fans, voltage, and temperature.
The server supports up to eight or 16 (depending on your model) 2.5-inch
hot-swap hard disk drives in the hot-swap bays. With the hot-swap feature, you
can add, remove, or replace hard disk drives without turning off the server.
The server supports up to 64 GB of system memory. The memory controller
supports error correcting code (ECC) for up to 16 single-sided industry-standard
third-generation double-data-rate 3 (DDR3) 800, 1066, and 1333, 240-pin,
registered, synchronous dynamic random access memory (SDRAM) dual inline
memory modules (DIMMs).
EasyLED diagnostics provides LEDs to help you diagnose problems. For more
information, see "EasyLED diagnostics panel" on page 131.
Memory mirroring improves the availability of memory by writing information to
the main memory and redundant locations in a mirrored pair of DIMMs.