Table of Contents
Advertisement
2. Authentication and its Application
user administrator, network administrator, file administrator,
machine administrator
supervisor
2
Specifying the User Lockout Function
This can be specified by the machine administrator using Web Image Monitor.
1.
Open a Web browser.
2.
Enter "http://(the machine's IP address or host name)/" in the address bar.
When entering an IPv4 address, do not begin segments with zeros. For example: If the address is
"192.168.001.010", you must enter it as "192.168.1.10" to connect to the machine.
The top page of Web Image Monitor appears.
3.
Click [Login].
The machine administrator can log on. Enter the login user name and login password.
4.
Click [Configuration], and then click [User Lockout Policy] under "Security".
The User Lockout Policy page appears.
5.
Set "Lockout" to [Active].
6.
In the drop down menu, select the number of login attempts to permit before applying
lockout.
7.
Set the "Lockout Release Timer" to [Active].
8.
In the "Lock Out User for" field, enter the number of minutes until lockout is disabled.
9.
Click [OK].
User Lockout Policy is set.
10.
Click [OK].
11.
Click [Logout].
Unlocking a Locked User Account
A locked user account can be unlocked by the administrator or supervisor with unlocking privileges using
Web Image Monitor.
1.
Open a Web browser.
96
Locked out User
Unlocking administrator
supervisor
machine administrator
Advertisement
Table of Contents
