Aficio C6055 Operating Instructions Manual page 215

Setting Authentication Only
Phase 2
Authentic HMAC-MD5-96/
ation HMAC-SHA1-96
Algorithm
Phase 2
Encryptio Cleartext (NULL
n encryption)
Algorithm
Phase 2
Inactive
PFS
Encryption Key Auto Exchange Setting Items
When you specify a security level, the corresponding security settings are automatically configured,
but other settings, such as address type, local address, and remote address must still be configured
manually.
After you specify a security level, you can still make changes to the auto configured settings. When
you change an auto configured setting, the security level switches automatically to "User Setting".
Setting
Address Type
Local Address
Remote Address
Authentication and Low Level
Encryption
HMAC-MD5-96/HMAC-
SHA1-96
DES/3DES/AES-128/
AES-192/AES-256
Inactive
Description
Specify the address type for
which IPsec transmission is
used.
Specify the machine's address.
If you are using multiple
addresses in IPv6, you can also
specify an address range.
Specify the address of the IPsec
transmission partner. You can
also specify an address range.
Transmission Using IPsec
Authentication and High
Level Encryption
HMAC-SHA1-96
3DES/AES-128/
AES-192/AES-256
2
Setting Value
• Inactive
• IPv4
• IPv6
• IPv4/IPv6 (Default
Settings only)
The machine's IPv4 or IPv6
address.
If you are not setting an address
range, enter 32 after an IPv4
address, or enter 128 after an
IPv6 address.
The IPsec transmission partner's
IPv4 or IPv6 address.
If you are not setting an address
range, enter 32 after an IPv4
5
213