Table of Contents
Advertisement
4.
Press [Network Security Level].
If the setting you want to specify does not appear, press [ Next] to scroll down to other settings.
5.
Select the network security level.
Select [Level 0], [Level 1], or [Level 2].
6.
Press [OK].
7.
Press [Exit].
8.
Press the [User Tools/Counter] key.
• p.35 "Logging on Using Administrator Authentication"
• p.36 "Logging off Using Administrator Authentication"
Making Settings Using Web Image Monitor
1.
Open a Web browser.
2.
Enter "http://(the machine's IP address or host name)/" in the address bar.
When entering an IPv4 address, do not begin segments with zeros. For example: If the address is
"192.168.001.010", you must enter it as "192.168.1.10" to connect to the machine.
The top page of Web Image Monitor appears.
Preventing Unauthorized Access
5
191
Advertisement
Table of Contents
