Table of Contents
Advertisement
2.
Enter "http://(the machine's IP address or host name)/" in the address bar.
When entering an IPv4 address, do not begin segments with zeros. For example: If the address is
"192.168.001.010", you must enter it as "192.168.1.10" to connect to the machine.
The top page of Web Image Monitor appears.
3.
Click [Login].
The administrator or supervisor with unlocking privileges can log on. Enter the login user name and
login password.
4.
Click [Address Book].
The Address Book page appears.
5.
Select the locked out user account.
6.
Click [Change].
7.
Select the "Cancel Lockout" check box under "Authentication Information".
8.
Click [OK].
9.
Click [Logout].
Auto Logout
This can be specified by the machine administrator.
When using user authentication management, the machine automatically logs you off if you do not use the
control panel within a given time. This feature is called "Auto Logout". Specify how long the machine is to
wait before performing Auto Logout.
1.
Press the [User Tools/Counter] key.
2.
Press [System Settings].
If User Authentication is Specified
2
97
Advertisement
Table of Contents
