Table of Contents
Advertisement
• Delete the cache memory in the Web Image Monitor after logging off.
User Lockout Function
If an incorrect password is entered several times, the User Lockout function prevents further login attempts
under the same user name. Even if the locked out user enters the correct password later, authentication will
fail and the machine cannot be used until the lockout period elapses or an administrator or supervisor
disables the lockout.
To use the lockout function for user authentication, the authentication method must be set to Basic
authentication. Under other authentication methods, the lockout function protects supervisor and
administrator accounts only, not general user accounts.
Lockout setting items
The lockout function settings can be made using Web Image Monitor.
Setting Item
Lockout
Number of Attempts
Before Lockout
Lockout Release Timer
Lock Out User for
Lockout release privileges
Administrators with unlocking privileges are as follows.
general user
Description
Specify whether or not
to enable the lockout
function.
Specify the number of
authentication
attempts to allow
1-10
before applying
lockout.
Specify whether or not
to cancel lockout after
a specified period
elapses.
Specify the number of
minutes after which
1-9999 min.
lockout is canceled.
Locked out User
If User Authentication is Specified
Setting Values
• Active
• Inactive
• Inactive
5
• Active
• Inactive
• Inactive
60 min.
Unlocking administrator
user administrator
Default Setting
95
2
Advertisement
Table of Contents
