2.
Enter "http://(the machine's IP address or host name)/" in the address bar.
When entering an IPv4 address, do not begin segments with zeros. For example: If the address is
"192.168.001.010", you must enter it as "192.168.1.10" to connect to the machine.
The top page of Web Image Monitor appears.
3.
Click [Login].
4.
Enter the login name and password of an administrator, and then click [Login].
5.
Make settings as desired.
• When logging on as an administrator use the login name and password of an administrator set in the
machine. The default login name is "admin" and the password is blank.
Administrator Authentication
2
39