Advanced - WatchNet ENX Series Manual

Parameter
PTZ activation
5.3.2.2 Default & Backup
Default: Restore factory default setup. You can select corresponding items.
Backup: Export current configuration to local PC or import configuration from current PC.
Please refer to Figure 5-36.
Please note system can not restore some information such as network IP address.
Please refer to the following sheet for detailed information.
Parameter
Select All
Export
Configuration
Import
Configuration

5.3.3 Advanced

5.3.3.1 HDD Management
Please select the storage device first and then you can see the items on your right become valid.
You can check the corresponding item here. See Figure 5-37.
Function
Here you can set PTZ movement when alarm occurs. Such as
go to preset, tour &pattern when there is an alarm.
Figure 5-36 Default and Backup
Function
Restore factory default setup.
Export system configuration to local PC.
Import configuration from PC to the system.
87