Search; Advanced; Hard Disk Management - WatchNet RTS series Installation And User Manual

Search

5.4
Please refer to chapter 4.3 Search.

Advanced

5.5
Double-click the advanced icon in the main window, the interface below will be
shown. See Figure 5-17. There are seven function keys: Hard Disk
461H
Management, Alarm Output, Alarm Input, Manual Record, Account, Auto
Maintain, and TV Adjust.

5.5.1 Hard Disk Management

Here the viewing and implementing of the hard disk management can be done.
Figure 5-18. Set the proper mode for each hard disk from the dropdown list.
When using redundant backup function, set one or more redundant HDD(s).
Please note that at least one read-write disk is needed, otherwise the system
will not record video. For detailed information refer to chapter 4.4 Schedule.
After completing setup select the save button, the system will need to reboot to
perform any changes.
Select the "Alarm Set" button, the interface is shown as below. See
5-19.
Please highlight icon
alarm setups can be enabled. The lower limit ranges from 1% to 99%. Alarm
channel number ranges from 1 to 6. Delay value is from 0 to 240 seconds.
Please note when HDD capacity is low the system will show an alarm once!
After completing setup select the OK button, this will go to the previous menu.
Figure 5-17
Figure 5-18
to select the corresponding function. One or more
Figure
463H
53