WatchNet ENX Series Manual page 96

Please refer to the following sheet for detailed information.
Parameter Function
Event The abnormal events include: no disk, no space, disk error, offline, IP

Type conflict.
You need to check the box here to enable this function.

 Threshold: It refers to the HDD free space.
Normal The corresponding alarm output channel when alarm occurs.
Out
The alarm output channel may vary. The interface here is for reference
only.
Latch The alarm output can delay for the specified time after alarm stops. The
value ranges from 10s to 300s.
Record After you selected the disk connection option, once the device is offline,
channel the activated channel can begin alarm record.
Record System can delay the record for specified time after alarm ended. The
latch value ranges from 10s to 300s.
Send If you enable this function, system can send out email to alarm the
email specified user.
Show Once you check the box to enable this function, system can display the
message alarm icon on the right of the channel name at the local end.
5.3.3.4 Alarm I/O
Here you can search alarm output status. See Figure 5-42.
Figure 5-41 Abnormality -2
90