Encode - WatchNet ENX Series Manual


Auto logout: Here is for you to set auto logout interval once login user remains inac tive for a
specified time. Value ranges from 0 to 60 minutes.

Navigation bar: Check the box here, system displays the navigation bar on the interface.

IPC Time Sync: You can input an interval here to synchronize the NVR time and IPC time.
Note:
Since system time is very important, do not modify time casually unless there is a must!
Before your time modification, please stop record operation first!
After completing all the setups please click save button, system goes back to the previous menu.

3.5.2 Encode

Encode setting includes the following items. See Figure 3-33.
Please note some series do not support extra stream.
Figure 3-30
Figure 3-31
Figure 3-32
25