WatchNet ENX Series Manual page 37

3.5.4.1 Network Setting
Network setting interface is shown as in Figure 3-41. Please draw a circle to enable
corresponding function and then double click current item to go to setup interface.
3.5.4.2 IP Filter
IP filter interface is shown as in Figure 3-42. You can add IP in the following list. System supports
IPv4 and IPv6 both. The list supports max 64 IP addresses.
3.5.4.3 NTP Setup
You need to install SNTP server (Such as Absolute Time Server) in your PC first. In Windows XP
OS, you can use command "net start w32time" to boot up NTP service.
NTP setup interface is shown as in Figure 3-43.

Host IP: Input your PC address.

Port: This series NVR supports TCP transmission only. Port default value is 123.

Update interval: minimum value is 1. Max value is 65535. (Unit: minute)

Time zone: select your corresponding time zone here.

Update period: You can input interval here.
Figure 3-41
Figure 3-42
31