WatchNet ENX Series Manual page 79

Please select separator such as – or /.
Data
Separator
There are two options: 24-H and 12-H.
Time
Format
DST Here you can set day night save time begin time and end time. See
Figure 5-18and Figure 5-19.
Language Here you can view the system current language. You can select
from the dropdown list.
There are two options: stop recording or overwrite the previous files
HDD Full
when HDD is full.
Here you can select file size. The value ranges from 1 to 120
Pack
(minute). Default setup is 60 minutes.
Duration
When you are using one remote control to manage multiple devices,
Device No
you can give a serial numbers to the device.
Please note current series product does not support this function.
Video Here you can view video format such as PAL.
Standard
5.3.2.2 Encode
The encode interface is shown as in Figure 5-20.
Please refer to the following sheet for detailed information.
Parameter Function
Channel Select the corresponding channel.
Channel
Display the current channel ID. You can also modify the channel ID here.
Name
Encoding
Sysem supports MJPG and H.264.
mode
Figure 5-20 Encode
73