WatchNet ENX Series Manual page 15

When you move your mouse on the top middle pane of the preview window, you can see the
following preview control bar. See Figure 3-3.
Please refer to the following sheet for detailed information.
Main stream and extra
1
stream switch
Front-end
2
talk
Navigation bar
The navigation bas is shown as below. See Figure 3-4.
① ：Main interface
② ：Output screen option:
Select corresponding output device and set the output window amount.
③ ：Window split:
System supports 1/4/8/9/16/25/36/64-window output mode. Please select the window mode and
then select the corresponding channels.
④ ：PTZ Setup
The PTZ setup is shown as in Figure 3-5.
Please note the commend name is grey once device does not support this function.
Double click the title to hide the PTZ menu interface.
Here you can control PTZ direction, speed, zoom, focus, iris, preset, tour, scan, pattern aux
function, light and wiper, rotation and etc.
Speed is to control PTZ movement speed. The value ranges from 1 to 8.The speed 8 is faster
than speed 1. You can use the remote control to click the small keyboard to set.
You can click and
The PTZ rotation supports 8 directions.
Figure 3-3
bidirectional
Figure 3-4
of the zoom, focus and iris to zoom in/out, definition and brightness.
Figure 3-5
3 Monitor source zoom in
4 Close monitor source.
9