WatchNet ENX Series Manual page 56


Alarm set: Click alarm set button, the interface is shown as below. See Figure 3-71. (This
interface is just like the abnormity setup). Please refer to chapter 3.7.2 for detailed
information.

HDD operation: You can select HDD mode from the dropdown list such as read-only or you
can erase all data in the HDD. Please note system needs to reboot to get all the modification
activated.
For the HDD group setup operation, please note:

Each channel's records can be stored into the specified HDD Group.

Each HDD Group is corresponding to several hard disks, while one hard disk is only
included in one HDD Group.

Each channel is only corresponding with one HDD Group, while one HDD Group can
store records from several channels.
Figure 3-70
Figure 3-71
50