WatchNet ENX Series Manual page 16

In the middle of the eight direction arrows, there is a 3D intelligent positioning key. See Figure
3-6. Please make sure your protocol supports this function and you need to use mouse to control.
X
Click this key, system goes back to the single screen mode. Drag the mouse in the screen to
adjust section size. The dragged zone supports 4X to 16X speeds. Drag the mouse from top to
the bottom to zoom in. Drag the mouse from bottom to up to zoom out. It can realize PTZ
automatically. The smaller zone you dragged, the higher the speed.
Here is a sheet for you reference.
Name
Zoom
Focus
Iris
Preset/ Patrol/Pattern/Scan
In Figure 3-5, please click the "set" button. The interface is shown as below. See Figure 3-7.
Here you can set the following items:

Preset

Tour

Pattern

Border
In Figure 3-5, click page switch button, the interface is shown as in Figure 3-8.
X328H328H 328H
Here you can activate the following functions:

Preset

Tour

Pattern

Auto scan

Auto pan

Flip

Reset

Page switch
Figure 3-6
Function function
key
Near
Near
close
Figure 3-7
Function function
key
Far
Far
Open
10