Alarm Output; Manual Record - WatchNet ENX Series Manual

3.7.3 Alarm Output

Here is for you to set proper alarm output.
Please highlight icon
After all the setups please click OK button, system goes back to the previous menu. See Figure
3-75.
3.7.4

Manual Record

Note:
You need to have proper rights to implement the following operations. Please mak e sure the
HDD has been properly installed.
3.7.4.1 Manual record menu
Right click mouse on the preview mode or in the main menu, from Advanced->Manual
Record, you can see manual record menu is shown as in Figure 3-76. You can click the
PgUp/PgDn button to view more channels.
3.7.4.2 Basic operation
There are two modes: main stream and extra stream. There are three statuses:
schedule/manual/stop. Please highlight icon"○" to select corresponding channel.

Manual: The highest priority. After manual setup, all selected channels will begin ordinary
recording.

Schedule: Channel records as you have set in recording setup (Main Menu->Setting-
>Schedule)

Stop: All channels stop recording.
to select the corresponding alarm output.
Figure 3-75
Figure 3-76
53