Default; Remote Device - WatchNet ENX Series Manual

3.5.8

Default

Click default icon, system pops up a dialogue box. You can highlight
setup.

Select all

General

Encode

Schedule

RS232

Network

Alarm

Detect

Pan/tilt/zoom

Display

Channel name
Please highlight icon
After all the setups please click OK button, system goes back to the previous menu.
Warning!
System menu color, language, time display mode, video format, IP address, user account will not
maintain previous setup after default operation!

3.6 Remote Device

In the main menu, click the Remote Device icon to go to the corresponding interface.
The remote device interface is shown as in Figure 3-66.

Device search: Click it to search IP address.

Add: Click it to connect to the selected device and add it to the Added device list. Support
Batch add.

Show filter: You can use it to display the specified devices from the added device.

Delete: Please select one device in the Added device list and then click it to remove.

Manual add: Click it to add the IPC manually. The default port number is 4000 if the
manufacture is Private. The default user name is admin and password is 1234.

Edit：Click Edit button
address. Please note this function is for IP from private manufacturer.
Figure 3-65
to select the corresponding function.
you can go to Figure 3-67. Here you can change the searched IP
to restore default factory
47