WatchNet ENX Series Manual page 17

Note:

Preset, tour and pattern all need the value to be the control parameter. You can define it as
you require.

You need to refer to your speed dome user's manual for Aux definition. In some cases, it
can be used for special process.

The following setups are usually operated in the Figure 3-5, Figure 3-7 and Figure 3-8.
Preset Setup
In Figure 3-5, use eight direction arrows to adjust camera to the proper position.
In Figure 3-7, click preset button and input preset number. The interface is shown as in Figure
3-9.
Now you can add this preset to one tour.
Activate Preset
In Figure 3-8, please input preset number in the No. blank, and click preset button.
Patrol setup (Tour Setup)
In Figure 3-7, click patrol button. The interface is shown as in Figure 3-10. Input preset number
and add this preset to a patrol (tour). For each patrol (tour), you can input max 80 presets.
Figure 3-8
Figure 3-9
Figure 3-10
11