About - WatchNet ENX Series Manual

Please refer to the following sheet for detailed information.
Type Parameter
Alarm Video loss
Type
Motion detection
Disk full
Disk error
Camera
masking
External alarm
Offline alarm
IPC external
alarm
IPC offline alarm
Operation Listening alarm
Video
Prompt
Sound pop up
Path

5.6 About

Click about button, you can view the web information. See Figure 5-56.
Figure 5-55 Alarm
Function
System alarms when video loss occurs.
System alarms when motion detection alarm
occurs,
System alarms when disk is full.
System alarms when disk error occurs.
System alarms when camera is viciously masking.
Alarm input device sends out an alarm.
NVR local-end offline alarm.
It refers to the on-off alarm signal from the front-
end device and can activate NVR local operation.
System can generate an alarm when the front-end
IPC disconnects with the local NVR.
System notifies web when alarm occurs (you select
from the above event type), and then web can
notify user.
When alarm occurs, system auto enables video
monitor.
This function only applies to video detection alarm
(motion detection, video loss and camera
masking). This function is not available in current
device.
Automatically pops up alarm dialogue box.
System sends out alarm sound when alarm occurs.
You can specify as you wish.
Here you can specify alarm sound file.
100