WatchNet ENX Series Manual page 36


Load balance: In this mode, device uses bond0 to communicate with the external device. All
cards are working now and bearing the network load. Their network load are general the
same. The system is shown as offline once these cards are all offline.
Important
For the IP address of IPv6 version, default gateway, preferred DNS and alternate DNS, the
input value shall be 128-digit. It shall not be left in blank.

Ethernet Card Name: In the multiple address modes, you can select the Ethernet card name
from the dropdown list.

Default Ethernet port: Please select after you enabled multiple access function.

IP address: Here you can use up/down button (
input IP address. Then you can set the corresponding subnet mask the default gateway.

DHCP: It is to auto search IP. When enable DHCP function, you can not modify IP/Subnet
mask /Gateway. These values are from DHCP function. If you have not enabled DHCP
function, IP/Subnet mask/Gateway display as zero. You need to disable DHCP function to
view current IP information. Besides, when PPPoE is operating, you can not modify
IP/Subnet mask /Gateway.

IP version: There are two options: IPv4 and IPv6. Right now, system supports these two IP
address format and you can access via them.

TCP port: Default value is 37777. You can change if necessary.

UDP port: Default value is 37778. You can change if necessary.

HTTP port: Default value is 80.

RTSP port: Default value is 554.
Important: System needs to reboot after you changed and saved any setup of the above
four ports. Please make sure the port values here do not conflict.

Max connection: system support maximal 20 users. 0 means there is no connection limit.

Preferred DNS server: DNS server IP address.

Alternate DNS server: DNS server alternate address.

Transfer mode: Here you can select the priority between fluency/video qualities.

LAN download: System can process the downloaded data first if you enable this function.
The download speed is 1.5X or 2.0X of the normal speed.
After completing all the setups please click save button, system goes back to the previous menu.

) or input the corresponding number to
Figure 3-40
30