Additional Function; Search - WatchNet ENX Series Manual

Parameter Function
Remote device Here you can see searched remote device name, IP address, TCP port
information and manufacturer name.
Please select the local device channel number to connect to the remote
Channel
device. You need to highlight the enable item to activate this function.
Now you can see remote device type, IP address and etc.
Device search Please click the Device Search button to search the all remote devices
available.
Please note system can only search the devices in the same segment
and the device shall disable the firewall.
Type Select remote device type here.
Please input remote device IP address, port number, remote
IP address,
device channel number and account manually.
port, remote
channel.
User/password Please input account to login the remote device.

5.3.4 Additional Function

5.3.4.1 Auto register
The auto register interface is shown as in Figure 5-49.
You can set the server IP and port if you want to use the auto register function. After the device
registered to the server, you can access the device after the client-end connected to the server.

5.4 Search

Click search button, you can see an interface is shown as in
Figure 5-49 Auto register
Figure 5-50.
X479H479H479H
96