WatchNet ENX Series Manual page 92

Please refer to the following sheet for detailed information.
Parameter
Event type
Channel
Sensitivity
Enable button
Region
Period
Anti-dither
Alarm output: s.
Record channel
Send email
Tour
Figure 5-35 Detect
Function
Motion detect, video loss and video masking
select the channel to activate recording function
System supports 6 levels. The sixth level has the highest
sensitivity.
Tick to enable
There are 396(22X18) small zones.
Blue area is the detection zone. Right click to view in full
screen, click OK before exit to save the setup.
Here you can set for business day and non-business day.
Range: 0～600
when alarm occurred, system enables peripheral alarm device
Select the recording channel (can be selected more than
once); this channel will be activated to record when alarm
occurs. Please note you need to set the motion detect record
period in the Schedule interface (Main menu-Setting-
Schedule) and go to the Record interface to set record mode
as Auto (Main menu-Advanced-Record)
System can send out email to alert you when alarm occurs.
Here you can enable tour function when alarm occurs.
86