WatchNet ENX Series Manual page 60

3.7.4.3 Enable/disable record
Please check current channel status: "○" means it is not in recording status, "●" means it is in
recording status.
You can use mouse or direction key to highlight channel number. See Figure 3-77.
3.7.4.4 Enable all channel recording
Highlight ○ below All, you can enable all channel recording.

All channel schedule record
Please highlight "ALL" after "Schedule". See Figure 3-78.
When system is in schedule recording, all channels will record as you have previously set
(Main menu->Setting->Schedule).
The corresponding indication light in front panel will turn on.

All channel manual record
Please highlight "ALL" after "Manual." See Figure 3-79.
When system is in manual recording, all scheduled set up you have set in will be null ((Main
menu->Setting->Schedule)).
You can see indication light in front panel turns on, system begins manual record now.
Figure 3-77
Figure 3-78
54