About Auxiliary Menu; Go To Pan/Tilt/Zoom Menu; Avt (Automatic Video Tracking); Preset /Tour / Pattern /Border Function - WatchNet RTS series Installation And User Manual

6 About Auxiliary Menu

Go to Pan/Tilt/Zoom Menu

6.1
Click Pan/Tilt/Zoom Icon, the PTZ interface is shown as Figure 6-1. Setting the
following items by using the
• Zoom
• Focus
• Iris
Figure 6-1
In Figure 6-1, please click direction arrows (See
position. There are eight direction arrows in total. (Please note there are only four
direction arrows on the DVR front panel.) The PTZ Trace button, allows the precisely
control of the PTZ by clicking and dragging the mouse in the direction that is needed.

6.1.1 AVT (Automatic Video Tracking)

In the middle of the eight direction arrows, there is a AVT. See
Click this button, and the system will go to single screen mode. Drag the
mouse in the screen to adjust section size. This will utilize the PTZ
automatically.
See the table on the next page for reference.
Name Function function
Zoom Near
Focus Near
Iris Close

Preset /Tour / Pattern /Border Function

6.2
In Figure 6-1 click the set button. The interface is shown as below: Set the
following items here:
• Preset
• Patrol
• Pattern
• Border
62
and icons can be done here.
Figure 6-1 ) to adjust PTZ
487H
Figure 6-1
Figure 6-2
Shortcut Function
►
Figure 6-2 .
488H
function Shortcut
Far
►
Far
Open